... | ... | @@ -45,17 +45,22 @@ Be aware: Depending on you network selection, some choices are not available and |
|
|
|
|
|
# send ultragrid streams to router
|
|
|
|
|
|
Makes this stream available for receivers on this channel.
|
|
|
|
|
|
![](/media/TG_device_ultragrid_send2router.png)
|
|
|
|
|
|
# receive ultragrid from router
|
|
|
|
|
|
In general it is only possible to receive the data from the channel the device is attached to. But receiving streams from the router allows to get the stream from another channel, too. This way you can send a stream to the router and simultaneously get it again from the router for your own use.
|
|
|
Receives the provided stream from a sender on this channel.
|
|
|
|
|
|
![](/media/TG_device_ultragrid_receiveFromRouter.png)
|
|
|
|
|
|
With the gateway in general, it is only possible to receive the data from the channel the device is attached to. When receiving there is an exception to this rule: it is possible to get the stream from another channel, too. This way you can send a stream to the router (lets say on channel #1) and receive it again from the router for your local use on channel #2.
|
|
|
|
|
|
|
|
|
# create a automatic peer to peer connection
|
|
|
|
|
|
If you want to connect two remote machines with each other for a true peer to peer connection and promises the lowest possible latencies. If you want to share the stream with multiple machines, or you have problems connecting, use the network topology that goes via the router.
|
|
|
If you want to connect two remote machines with each other for a true peer to peer connection this network type promises the lowest possible latencies. If you want to share the stream with multiple machines, or you have problems connecting, use the network topology that goes via the router.
|
|
|
|
|
|
![](/media/TG_device_ultragrid_peer2peerAutomatic.png)
|
|
|
|
... | ... | |